Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación descargar pdf (Pagina 89)

For NE2000 compatibles that do not operate at all combinations of I/O address

and IRQ settings, use the default values of IRQ 3 and I/O address 0x300.

NE2000plus cards only: If the card has been conﬁgured to run in Shared Memory

mode, it will use 0x4000 bytes of shared memory in the range 0xD0000–0xDFFFF.

Check that the BIOS setup allocates this range of memory to the adapter and that

other cards in the system do not conﬂict. If a conﬂict is unavoidable, conﬁgure the

NE2000plus in I/O mode so that it will not use shared memory. (To conﬁgure the

NE2000plus card, the vendor-supplied DOS program PLUSDIAG must be used.)

Device Reference Pages 77

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 126 127

Sin comentarios

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación Pagina 89