
0 - Disabled (Default)
1 - Enabled
alrm_msg_enable: This property enables or disables Alarm messages due to
faults in the Compaq Storage system connected to the 825, 875, or 876
controller. The valid values are:
0 - Disabled
1 - Enabled (Default)
debug_flag: This property enables or disables debug messages from the
driver. The valid values are:
0 - Disabled (Default)
1 - Enabled
queue_depth: This property specifies the number of active requests the driver
can handle for a controller. The maximum and default value for this property
is 37; the minimal value is 13. You can reduce the value to support multiple
controllers if you cannot allocate enough memory while trying to load the
driver.
board_id: This property specifies additional controller IDs the driver has to
support. The driver currently supports Compaq 825, 875, and 876 controllers. It
recognizes the board ID for Compaq 825 Fast Wide SCSI-2, Compaq 875 Wide
Ultra SCSI, and Compaq Dual Channel Wide Ultra SCSI-3 controllers by
default.
ignore-hardware-nodes: Set this property to 0 if present.
3. To activate the configuration changes, as root type:
# touch /reconfigure
# reboot
Device Reference Pages 29
Comentarios a estos manuales