Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación descargar pdf (Pagina 111)

Creative Labs Sound Blaster 16, Sound

Blaster AWE32, Sound Blaster Vibra 16

Solaris Device Driver:

sbpro

Device Type:

Audio

Adapters:

Creative Labs Sound Blaster 16,

Sound Blaster AWE32,

Sound Blaster Vibra 16

Bus Type:

ISA

Note - The features and interfaces that are supported by the Solaris sbpro driver

are described in the audio(7D) and sbpro(7D) man pages.

Note - The Sound Blaster 16 optional SCSI-2 interface is supported by the Solaris

aic driver. See the “Creative Labs Sound Blaster 16 SCSI-2 Interface” Device

Reference Page for conﬁguration information on the SCSI controller.

Preconﬁguration Information

For Sound Blaster 16 cards that have an on-board SCSI subsystem, the audio

subsystem needs its own I/O (port) address and an IRQ, distinct from those of the

SCSI subsystem.

Output volume is controlled by software. Be sure the volume thumbwheel on the

back of the card is turned all the way up to the maximum volume setting;

otherwise you may not hear any sound.

Microphone input is treated as a mono source; however, all the jacks on the back

of the Sound Blaster cards are stereo jacks. If your microphone has a mono plug,

convert it to stereo using an appropriate adapter.

Supported Settings

If your card supports Plug and Play, your device resources are conﬁgured

automatically. Use the following settings for devices that don’t support Plug and Play.

Device Reference Pages 99

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 126 127

Sin comentarios

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación Pagina 111