
Adaptec AHA-1540B, 1542B, 1542C,
1542CF, 1542CP HBAs
Solaris Device Driver:
aha
Device Type:
SCSI
Adapters:
Adaptec AHA-1540, AHA-1542B, AHA-1542C,
AHA-1542CF, AHA-1542CP
Bus Type:
ISA
Preconfiguration Information
Adaptec AHA-1542C and AHA-154CP only: If only one adapter is installed, use
default configuration parameters in both basic and advanced modes.
Adaptec AHA-1540CF only: The DMA transfer rate should be left at the default
unless your motherboard supports higher rates.
If installing more than one adapter, enable the BIOS on both. If Plug and Play is
disabled on the host system and a mix of Plug and Play and non-Plug and Play
adapters is installed, ensure that the non-Plug and Play adapters do not use
default values for the I/O base address, DMA channel, and IRQ level.
Supported Settings
• IRQ Level: 9, 10, 11, 12, 13, 14, 15
• I/O Address: 0x330
• DMA Channel: 6
AHA-1542C, AHA-1542CF, and AHA-1542CP only:
10
Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998
Comentarios a estos manuales