Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación descargar pdf (Pagina 52)

printer or Ethernet adapter, shut down the Solaris operating environment and turn

off the computer and any SCSI devices attached to the T348.

With the power turned off, disconnect the old device and connect the new one. If

switching to the T348, turn on any SCSI devices you intend to use. Turn on the

computer and do a reconﬁguration boot.

When reconﬁguring the system to add other devices, make sure the T348 and all

its devices are plugged in and turned on; otherwise they will be removed from the

conﬁguration. If you accidentally reconﬁgure without the T348 plugged in, plug it

in and repeat the reconﬁguration process.

Conﬁguration Procedure

1. Install the Solaris software.

2. Shut down the Solaris operating environment and turn off the computer.

3. Plug the T348 adapter into the selected (or only) parallel port.

4. Attach all required SCSI devices to the T348.

5. Turn on all the SCSI devices.

6. Turn on the computer.

Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 126 127

Sin comentarios

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación Pagina 52