Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guía de instalación Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 127
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
SCSI Disk Arrays/RAID Controllers
American Megatrends MegaRAID 428
SCSI RAID Controller (DU 2)
Solaris Device Driver:
mega
Release/Version:
DU 2/1.04
Device Type:
SCSI RAID
Adapter:
American Megatrends MegaRAID 428 SCSI RAID
Bus Type:
PCI
Configuration Procedure
Contact American Megatrends to get the optional megamgr configuration utility.
The MegaRAID controller cannot be configured by editing the
/kernel/drv/mega.conf file.
Follow this procedure to configure and use more than one logical drive. If the
/kernel/drv/cmdk.conf file is not carefully edited, the system may panic
upon reboot.
1. Press Control-M while the system is starting up to configure the controller and
all logical drives.
2. Install the Solaris software and reboot.
You will only see a single logical drive available during installation.
3. Open /kernel/drv/cmdk.conf and add additional drives by duplicating the
existing entry for target=0 and incrementing the lun field by one for each
additional logical drive you want the Solaris software to recognize.
42
Device Reference Manual for Solaris 2.6 (Intel Platform Edition) April 1998
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 126 127

Comentarios a estos manuales

Sin comentarios