Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Guía de instalación Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
Troubleshooting the SIERRA™ plus film digitizer 73
VIDAR Film Digitizer Installation Guide
Cleaning the multi-film feed tray
After extensive use, dust or lint particles may build up on the feed roller
and idler wheels.
To remove residue, loop a piece of light adhesive tape (such as Scotch®
Magic™ Tape) around your fingers with the adhesive side out, then
gently pat the roller and wheels as you turn them.
CAUTION:
Do not
use any type of cleaning solvent on the feed roller
and idler wheels, as this could damage these components
and cause improper operation.
Do not
use tape with a strong adhesive, such as packing
tape or strapping tape.
Do not
use tape requiring the adhesive to be wetted, such as
brown paper packing tape.
Idler wheels
Feed roller
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 85 86

Comentarios a estos manuales

Sin comentarios