Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Guía de instalación Pagina 50

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 49
Installing SCSI hardware for the SIERRA™ plus film digitizer 48
VIDAR Film Digitizer Installation Guide
2. Install the SCSI card.
a. Turn off power to the computer and disconnect the computer’s power
cord from the electrical outlet.
b. Remove the cover from the computer. (Refer to the computer’s
manual for instructions on removing the cover.)
Tip:
If the computer is a tower model, it’s easier to install the
SCSI card when the tower is laid on its side.
c. Locate an unused PCI expansion slot (PCI connectors are typically
white or ivory). Remove the expansion slot cover. Save the slot
cover screw for use in step 2g.
d. Before handling the SCSI card, discharge your static electricity by
touching a metal part on the computer chassis.
e. Remove the SCSI Card 2930U from its anti-static packaging. Handle
the card only by its edges.
continued
PCI expansion slots
Vista de pagina 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 85 86

Comentarios a estos manuales

Sin comentarios