Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Guía de instalación descargar pdf (Pagina 68)

Operating the SIERRA™ plus film digitizer 66

VIDAR Film Digitizer Installation Guide

Note:

When a film has been staged, it is in the digitizer’s light

path. The ADC (Automatic Digitizer Calibration) feature requires

that the light path be clear of the film for proper background

calibration of the digitizer. The digitizer will automatically adjust

the film’s position to properly proceed with ADC. Depending on

the location of the film’s leading or trailing edge, and the length

of time the film has been blocking the light path, the film will be:

a) pushed up, b) pushed down, or c) ejected to remove the film

from the light path.

5. Using your scanning software, execute the Scan command.

The LED will flash green rapidly, indicating the first scan is in

progress.

When the first scan is complete, the second film will be scanned and

so forth, until the last film has been scanned.

When the entire batch has been scanned, the LED will return to solid

green.

Note:

After the scan, the last film may or may not be ejected—

your scanning software determines what happens. If the

software’s

Auto Eject

function is activated, the film will drop

into the exit tray. Otherwise, the lower rollers in the scanner will

hold the film until one of the following occurs:



Another film is detected.



You manually eject the film from the software.



The ADC process begins by ejecting the film.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 85 86

Sin comentarios

Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Guía de instalación Pagina 68