Adaptec 2930 - SCSI Card Ultra Storage Controller 20 MBps Guía de instalación Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Configuring SCSI settings for the SIERRA™ plus film digitizer 18
VIDAR Film Digitizer Installation Guide
To change the digitizer’s SCSI termination:
Note:
The SCSI termination switch is preset at the factory for
internal termination on
.
a. Lay the digitizer on its back, with its bottom surface toward you.
b. Locate the SCSI termination switch on the bottom of the digitizer.
c. Verify that Switch 1 is in the position
shown at the top right.
(Switch 2 has no function.)
12
12
Switch 1 set
for no internal
termination
Switch 1 set
for internal
termination
Factory (recommended)
termination switch setting
Not recommended
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Comentarios a estos manuales

Sin comentarios