Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Información técnica descargar pdf (Pagina 91)

Chapter 3 Installing Applications 77

4. On the Routing and Remote Access dialog box, uncheck the Enable remote

access control box and check the Enable server as a router control box.

Select a routing type and click Next.

5. When prompted, click Finish to complete the routing service installation and

start the service.

Configuration and Troubleshooting

After the routing service is configured and started, you need to add static IP

addresses for each of the network cards.

1. In the Routing and Remote Access utility, double-click IP Routing.

2. Double-click the General icon. A list of all the network cards installed on your

machine appears.

3. Double-click Local Area Connection and select the Configuration tab.

4. Click Use the following IP address.

5. Specify an IP address and subnet mask for the Local Area Connection.

6. In the Router (Default Gateway) field, enter the IP address of the network to

which you want to route the packets.

7. Repeat IP configuration for all other Local Area Connections.

At a command prompt, type route print to see what routes your machine

has. You can also use the ping and tracert commands to troubleshoot or verify

that the Multi-Protocol Routing service is working for TCP/IP.

After configuring IP for each network card on your machine, the Windows 2000

server starts exchanging routing information with other Windows 2000 and RIP

routers. For more information about TCP/IP, see the appropriate Windows 2000

documentation.

IPX

If no network number is defined for the segment to which Windows 2000 server is

connected, you must define a unique network number for that segment. For

example, if you have a Windows 2000 server with two network interface cards

and the first network card is connected to an existing Novell network, you can

leave the network number blank because Windows 2000 auto-detects the network

number for that segment. If the second network card is connected to the Microsoft

network; no IPX network number is defined for this segment. You must type in a

unique network number for this segment. Use Ipxroute.exe to determine the

network number of your network adapter. Ensure that the same frame types are

selected for both network adapters.

Note

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 185 186

Sin comentarios

Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Información técnica Pagina 91