Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Información técnica Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
24 MetaFrame Solutions Guide
6. Press S to configure additional SCSI adapters, select Other, and press
ENTER.
7. When prompted for a driver diskette, insert the Adaptec 7800 Family Manager
Device Drivers diskette and press ENTER. Select the Adaptec AIC-78XX PCI
SCSI controller (NT 4.0) and press ENTER to continue.
8. Press S to configure additional SCSI adapters. Expand the list of additional
SCSI adapters, select the IDE CD-ROM (ATAPI 1.2)/PCI IDE controller, and
press ENTER to continue.
9. When prompted to choose where to install Windows 2000, select the external
(non-RAID) hard disk drive and press C to create a partition.
It is recommended that you create a 1000MB partition for the installation
of Windows 2000, leaving the bulk of the hard disk to be used for the page
file.
10. Refer to the Microsoft documentation to continue the installation.
11. From the Network Adapters dialog box, click Select from list… to display
the Select Network Adapter dialog box.
12. Click Have Disk… and insert the IBM 100/10 EtherJet PCI adapter diskette.
Click OK to continue.
13. Select the IBM 100/10 EtherJet PCI adapter and click OK to continue.
14. Refer to the Microsoft documentation to complete the installation.
15. Insert the MetaFrame Version 1.0 CD-ROM and choose MetaFrame Setup
from the list of on-screen options.
16. See the MetaFrame Administrator’s Guide to complete installation and set up.
Video Card Adapter Installation
During system installation, the standard video driver supplied with Windows 2000
is automatically installed. To obtain larger screen sizes and video color depth, you
must install the manufacturer’s supplied video driver. The following procedure
describes how to install the correct video driver.
1. Click Start, select Settings, then click Control Panel.
2. In Control Panel, double click Display.
3. Select the Settings tab and then click the Display Type... button.
4. In the Adapter Type field, click the Change... button. The Change Display
dialog box appears.
5. Click the Have Disk... button.
6. Insert the new display driver diskette into drive A, then click OK.
7. From the list of displayed S3 devices, select your S3 device.
Note
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 185 186

Comentarios a estos manuales

Sin comentarios