Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Información técnica Pagina 88

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 87
74 MetaFrame Solutions Guide
6. Insert the driver installation diskette that accompanied your new hardware in
drive A (or other appropriate drive). From the \Winnt subdirectory, extract the
self-extracting zipped file (6540v4_19_2.exe) to an empty directory on your
computer.
7. At a command prompt, type change user /install.
8. Run Setup.exe. In RocketPort/RocketModem NT Setup, select an I/O
address range (180-1c3 hex default was chosen for this installation). Running
Setup creates an entry for the Comtrol RocketModem in the Start menu.
Make sure that these selections do not conflict with an existing I/O
address range or with COM ports already in use.
9. In the remaining RocketPort/RocketModem Setup dialog boxes, click OK.
10. Reboot the system in order for the changes to take effect.
Setting up Comtrol RocketModem
1. In Control Panel, double-click Phone and Modem Options. Click the
Modems tab.
2. Click Add. Check Don’t detect my modem; I will select it from a list.
3. Choose Comtrol as the manufacturer and select RocketModem VS2000 v.34.
4. Select all ports in the range assigned to the RocketModem board and click
Next.
5. Click Yes for all the subsequent dialog boxes to continue the installation.
6. Click Finish to complete the setup.
7. Click OK.
Terminal Connection Configuration Using Comtrol
RocketModem
1. Click Start, select Programs, then Administrative Tools, and then Terminal
Services Configuration.
2. In the Terminal Services Configuration dialog box, click Action and select
Create New Connection.
3. Under Connection type, select Citrix ICA 3.0, choose Basic encryption level,
and select Use remote control with default user settings.
4. Enter a connection name and select Async for transport. Click Next. Select
one of the RocketModem COM ports for device, click Next, and then click
Finish.
5. Repeat Steps 1–4 for additional terminal connections.
6. Reboot the server.
Note
Vista de pagina 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 185 186

Comentarios a estos manuales

Sin comentarios