
Chapter 3 Installing Applications 45
Software Requirements
K
IBM OS/2 Warp 4.0
K
File and Print Client Services
K
TCP/IP Services
K
NetWare Client Services
K
Citrix MetaFrame Version 1.8 for Windows 2000
K
ICA DOS Client
K
ICA Win16 Client
K
ICA Win16 Web Client (ALE 16-bit Plugin), available on the Citrix Web
site at http://download.citrix.com
Installation
OS/2 Installation
Install OS/2 Warp Version 4.0 following the standard installation procedure. Use
the default settings. Install networking support for File and Print Client Services,
Novell NetWare, TCP/IP Client Services, and the NetWare client. Verify that the
network adapter settings are correct. Select the workstation name, description (if
desired), and domain name. Choose the protocol you want to use. For TCP/IP,
specify the hostname (usually the same as the workstation name), the IP address,
the subnet mask, the router address, and the domain name as required by your
configuration, or use DHCP if a DHCP server is present on the LAN.
IBM OS/2 Warp Version 4.0 includes network and TCP/IP protocols and software
as part of the operating system. Follow the instructions for installing the additional
network and TCP/IP software as part of the installation of the system. Network
and TCP/IP software for WINOS2 and virtual DOS are installed as defaults
during the installation.
WINOS2 Setup
Before installing the ICA Client, you must set the WINOS2 settings to allow the
ICA Client to operate properly with DDE and Clipboard. Establish the settings as
follows:
You can elect not to make these settings if you do not intend to use the DDE
or Clipboard functions.
1. Under OS/2 System Folder, click System Setup and then WIN-OS/2 Setup.
2. Under WIN-OS/2 Setup Properties, click the Data Exchange tab.
3. In the Data Exchange Settings dialog box, choose Public for both selections.
This is required for DDE and Clipboard operation.
Note
Comentarios a estos manuales