Adaptec 2940U - AHA Storage Controller Ultra SCSI 20 MBps Información técnica Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
Chapter 2 Deploying the MetaFrame Servers and ICA Clients 23
expansion slots. The M10 adds the processing power of up to four Intel Pentium II
Xeons.
Requirements
Software Requirements
K
MetaFrame Version 1.8 for Windows 2000
K
Microsoft Windows 2000 with Terminal Services installed
K
Adaptec 7800 Family Manager Set for Windows NT 4.0, Version 3.01 or
higher
K
IBM ServeRaid Adapter Device Drivers, Version 3.00.18 or higher
K
IBM 100/10 EtherJet PCI Adapter Device Drivers, Version 2.5 or higher
K
S3 Incorporated Video Adapter Device Drivers, Version 3.24.10 or higher
Hardware Requirements
K
External SCSI cable (IBM Part No. 76H3589)
K
External half-high SCSI storage enclosure (IBM Part No. 3510020)
K
Netfinity 4.51G 10K Wide Ultra SCSI hard disk drive (IBM Part No.
01K8009)
Before Installation
1. Obtain the required device drivers by contacting IBM Support or visiting the
IBM Web site at http://www.pc.ibm.com/servers.
2. Create boot diskettes. At a DOS prompt, type winnt32 /ox from the \I386
directory on the Windows 2000 CD-ROM and follow the on-screen
instructions.
3. Install the Netfinity hard disk drive in the external SCSI enclosure and connect
it to the Adaptec SCSI controller card’s external port using the SCSI cable.
Installing Windows 2000 and MetaFrame
1. Insert boot disk #1, turn on the machine, and follow the on-screen instructions.
2. When prompted to autodetect mass storage controllers, press S to skip mass
storage detection.
3. Press S to configure additional SCSI adapters.
4. Expand the list of additional SCSI adapters, select Other (located at the end of
the list), and press ENTER.
5. When prompted for a driver diskette, insert the IBM ServeRaid Device Drivers
diskette and press ENTER. Select the IBM ServeRaid Adapter and press
ENTER to continue.
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 185 186

Comentarios a estos manuales

Sin comentarios