Adaptec AHA-1532P Guía de usuario descargar pdf (Pagina 97)

PowerQuest Drive Image 89

Restart the computer and allow the drive overlay program to load.

Put your Drive Image bootable diskette in your diskette drive (A:).

In the drive overlay boot menu, select the option to boot from a floppy disk.

Make sure that Drive Image is showing the correct size for each drive and the correct

order for the copy sequence.

Finish the copy process.

Using Drive Image on a Notebook Computer

To make PCMCIA slots on a notebook computer active for use with Drive Image, you

must load the correct drivers in DOS.

Determine the correct card services DOS driver for your hardware.

The driver is supplied by the hardware manufacturer. It may be called card services,

card-bus services, CardWare, or another name chosen by the manufacturer. Consult

the hardware documentation or contact the manufacturer if you do not know which

driver is required.

Add a statement to your CONFIG.SYS file to load the card services driver.

For example, DEVICE=PCMI80CL.SYS.

There may be additional switches to configure the device. The hardware manufacturer

can provide detailed information.

Add a statement to your CONFIG.SYS file to load the NIC or SCSI driver you need.

For example, DEVICE=C:\3COM\EL589ND4.SYS.

Using Drive Image with a Castlewood ORB Drive

To use a Castlewood ORB drive with Drive Image, the drive must be correctly configured

in the computer BIOS so that DOS can assign it a drive letter and read and copy large files

to and from the drive. Drive Image recognizes the ORB drive as removable media only if

the computer BIOS can be configured to recognize the drive as removable media.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 127 128

Sin comentarios

Adaptec AHA-1532P Guía de usuario Pagina 97