Adaptec AHA-2930CU Guía de instalación descargar pdf (Pagina 59)

Operating 51

VIDAR Film Digitizer Installation Guide

Cleaning the Auto-Feed Roller

After extensive use, dust or lint

particles may build up on the

Auto-Feed Roller and Idler

Wheels.

To remove residue, loop a piece

of light adhesive tape (such as

Scotch® Magic™ Tape) around

your fingers with the adhesive

side out, then gently pat the roller

and wheels as you turn them.

CAUTION:

 Do not use any type of cleaning solvent on the feed roller

and idler wheels, as this could damage these components

and cause improper operation.

 Do not use tape with a strong adhesive, such as packing

tape or strapping tape.

 Do not use tape requiring the adhesive to be wetted, such as

brown paper packing tape.

If the Idler Wheels don’t turn freely, contact VIDAR Technical Support.

Contact VIDAR Technical Support if you have any questions

about installing or using your VIDAR film digitizer:

Phone: +1.800.471.SCAN (+1.800.471.7226)

+1.703.471.7070 outside the U.S.

Idler Wheels

Auto-Feed Roller

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

Sin comentarios

Adaptec AHA-2930CU Guía de instalación Pagina 59