Adaptec AHA-2930CU Guía de instalación descargar pdf (Pagina 56)

48 Operating

VIDAR Film Digitizer Installation Guide

Note: When a film has been staged, it is in the digitizer’s light

path. The ADC (Automatic Digitizer Calibration) feature requires

that the light path be clear of the film for proper background

calibration of the digitizer. The digitizer will automatically adjust

the film’s position to properly proceed with ADC. Depending on

the location of the film’s leading or trailing edge, and the length

of time the film has been blocking the light path, the film will be:

a) pushed up, or b) pushed down.

4. Using your scanning software, execute the Scan command.

Note: Proper orientation of the

film during loading depends on

the scanning application program

you are using. Some scanning

programs rotate images 180° for

display. If images appear upside

down, you may be able to set the

default orientation in the scanning

application. If this option isn’t

available, then insert films into the

digitizer upside down, as shown

here.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Sin comentarios

Adaptec AHA-2930CU Guía de instalación Pagina 56