Adaptec AHA-2930CU Guía de instalación descargar pdf (Pagina 25)

Installing SCSI hardware 17

VIDAR Film Digitizer Installation Guide

Install the SCSI card.

a. Turn off power to the computer and disconnect the computer’s power

cord from the electrical outlet.

b. Remove the cover from the computer. (Refer to the computer’s

manual for instructions on removing the cover.)

Tip: If the computer is a tower model, it’s easier to install the

SCSI card when the tower is laid on its side.

c. Locate an unused PCI expansion slot (PCI connectors are typically

white or ivory). Remove the expansion slot cover. Save the slot

cover screw for use in step g.

d. Before handling the SCSI card, discharge your static electricity by

touching a metal part on the computer chassis.

e. Remove the SCSI Card from its anti-static packaging. Handle the

card only by its edges.

continued

PCI expansion slots

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Sin comentarios

Adaptec AHA-2930CU Guía de instalación Pagina 25