Adaptec AHA-2930CU Guía de instalación Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
Installing device drivers 21
VIDAR Film Digitizer Installation Guide
2. Use the SCSI utility to configure the SCSI BIOS
In most cases, the digitizer is not properly detected after you install the
SCSI adapter. This is because the computer tries to boot from the
adapter, but no SCSI hard disk is connected. You must correct this
behavior in the SCSI BIOS.
a. Turn on the computer.
b. When the computer boots up, it will detect the SCSI Adapter. When
prompted, press <Ctrl A> to access the SCSI Utility.
c. In the Options menu (see below), select the Configure/View Host
Adapter Settings option.
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Comentarios a estos manuales

Sin comentarios