Adaptec 2110S - SCSI RAID Controller Guía de instalación descargar pdf (Pagina 65)

3-30

Adaptec RAID Installation Guide

9 To add a drive to a secondary controller, type

diskadd cCCbBBtTTdDD

For example, a new drive or array is connected to a secondary

Adaptec RAID controller on Channel A and the drive has a

TID 0. The controller number is 1 because it is a secondary

controller. Therefore, the command would be

diskadd c1b0t0d0

For details on

diskadd, refer to the diskadd(1M) man page.

FreeBSD

The Adaptec RAID controller driver is embedded in the kernel for

versions 4.1.1 and later. Therefore, you do not need to do anything

related to driver installation once your operating system is installed.

For the most up-to-date information on Adaptec’s support of

FreeBSD, or to download driver sources, visit

http://opensource.adaptec.com.

Caution: When adding a Zero Channel RAID (ZCR)

controller to an existing system, backup all data from

system drives prior to the installation. If the boot device is

connected to one of the onboard SCSI channels, the

operating system will need to be reinstalled after installing

the ZCR controller.

COMBINED RAID IG.BOOK Page 30 Tuesday, September 25, 2001 5:46 PM

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 105 106

Sin comentarios

Adaptec 2110S - SCSI RAID Controller Guía de instalación Pagina 65