Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Guía de usuario descargar pdf (Pagina 317)

100

101

9A-26 A-63054 February 2004

Mask tab

Mask coordinates define the area to be scanned. Values are expressed in

hundredths of an inch. By default, all predefined image setups contain the

maximum scan mask for the attached scanner. The maximum scan mask is

ideal for Capture Software’s auto-crop function.

To define a maximum scan mask:

1. Type 0 in Left field.

For both the front and rear images for the Scanner 2500, the

recommended value is 24.

For the rear image setup for the Scanner 1500 (rotary scanner only), the

recommended value is 16.

2. Type 0 in Top field.

3. Specify the scanner’s maximum width in the Width field.

Scanner 1500 and Scanner 2500 Width value: up to 11.7 in. (coordinate

value: 1168).

For all other Kodak scanners, the maximum width value is 12 in.

(coordinate value: 1200).

NOTE: The Left and Width fields cannot exceed the scanner’s

maximum width.

4. Specify the scanner’s maximum height in the Height field.

Scanner 1500 and Scanner 2500 Height value: up to 17 in. (coordinate

value: 1700).

Scanner 3500, Scanner 3510, and Color Scanner 3590C Height value: up

to 26 in. (coordinate value: 2600).

Scanner 5500 and Scanner 7500 Height value: up to 20 in. (coordinate

value: 2000).

Scanner 5500 and Scanner 7500 Height value with the Document Image

Manager: up to 30 in. (coordinate value: 3000).

Scanner 9500 Height value: up to 30 in. (coordinate value: 3000).

NOTE: When scanning in duplex mode on a Scanner 1500 and Scanner 2500,

the Width and Height mask coordinates for the front and rear Image

Setup must be the same.

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 411 412

Comentarios a estos manuales

Sin comentarios

Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Guía de usuario Pagina 317

Comentarios a estos manuales