Adaptec 2100S - SCSI RAID Controller Guía de instalación descargar pdf (Pagina 53)

3-18

Adaptec RAID Installation Guide

13 If your system contains multiple Adaptec RAID controllers,

repeat Steps 6 through 12 for each Adaptec RAID controller.

14 Restart the system and then open the Device Manager. It

should now show an Adaptec I

O RAID Host Adapter in the

SCSI and RAID Controllers section.

Upgrading Windows 95 to Windows 98/Me (Upgrade Version)

If you are upgrading the system from Windows 95 to

Windows 98/Me in an existing system that already has a

functioning Adaptec RAID controller, no further configuration is

necessary. Perform the Windows upgrade; the functionality of the

Adaptec RAID controller is retained.

If the controller is being added in addition to the upgrade, follow the

procedure in Installing the Driver in a New Windows 98/Me System on

page 3-12.

Novell NetWare

The Adaptec RAID Installation CD contains device drivers for

NetWare 4.11, 4.2, and 5.x. The following Novell support packs are

the minimum level required before installing Adaptec RAID

controller software and drivers:

After you have installed the drivers, you can use the normal

NetWare procedures for modifying disk partitions, applying hot

fixes, or performing volume maintenance.

NetWare Revision Level Support Pack

4.11 or 4.2 8a

5.0 5

5.1 1

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 99 100

Sin comentarios

Adaptec 2100S - SCSI RAID Controller Guía de instalación Pagina 53