Adaptec 2100S - SCSI RAID Controller Guía de instalación descargar pdf (Pagina 45)

3-10

Adaptec RAID Installation Guide

d When you see the Adaptec splash screen, click Create

Driver Disk. Then, click the appropriate operating system.

e Insert a floppy disk and click OK. The system creates the

driver disk.

2 Shut down the system and remove the Adaptec RAID

Installation CD and the driver floppy disk.

3 Restart the system and open the Control Panel. Click the SCSI

Adapters icon. Then select the Drivers tab and click Add.

4 Insert the driver disk you created in Step 1 and then click Have

Disk.

5 Select Adaptec I

O RAID Host Adapter Driver for NT 4.0.

6 After the driver is loaded, shut down the system.

7 Install and configure the Adaptec RAID controller and hard

drives according to the instructions in Chapter 2. Leave the

existing controller installed.

8 Start up the system.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 99 100

Sin comentarios

Adaptec 2100S - SCSI RAID Controller Guía de instalación Pagina 45