Adaptec 2100S - SCSI RAID Controller Guía de instalación descargar pdf (Pagina 30)

2-6

Adaptec RAID Installation Guide

Installing Additional Cache Memory

Adaptec RAID controllers can be upgraded with additional cache

memory. See Cache Memory Module on page 1-12 for additional

information about memory modules for cache memory.

To install cache memory modules

1 Ground yourself and take appropriate ESD precautions.

2 If necessary, power down your system and remove the RAID

adapter.

Note: Adaptec 3200S/3210S/3400S/3410S with battery backup

module only—Remove the battery backup module before

installing or removing cache memory.

3 Proceed to the appropriate section for your controller:

■ Seating the Module – Adaptec 3200S/3400S Only on page 2-6.

■ Seating the Module – Adaptec 2400A/2100S/3210S/3410S Only

on page 2-7.

Seating the Module

–

Adaptec 3200S/3400S Only

Holding the circuit board and module by the edges, slide the

module into the socket as shown below. Refer to Appendix A for

socket locations.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Sin comentarios

Adaptec 2100S - SCSI RAID Controller Guía de instalación Pagina 30