Adaptec SCSI RAID 2120S Guía de instalación descargar pdf (Pagina 210)

6-7

diagnostic Commands

diagnostic moderation set count

To set the default interrupt count on the controller, use the

diagnostic moderation set count command.

Caution: Use this command only under the direction of

technical support.

Syntax

diagnostic moderation set count {integer}

Parameters

{integer}

Specifies the value (for example, 700) you want to set as the

default interrupt count on the controller. The interrupt count

is the number of outstanding requests on the controller

needed before the delay time (the time specified by the

diagnostic set timer command) takes effect. For

example, if the interrupt count is set to 32 and the delay time

is set to 10, the controller batches I/O request responses for

one millisecond only if there are more than 32 I/Os

outstanding in the one millisecond interval.

Related Commands

diagnostic commands:

■ diagnostic moderation set timer (page 6-8)

■ diagnostic moderation show count (page 6-9)

■ diagnostic moderation show timer (page 6-10)

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 277 278

Sin comentarios

Adaptec SCSI RAID 2120S Guía de instalación Pagina 210