Adaptec P2280A Guía de instalación descargar pdf (Pagina 14)

English

Updating SCSI-Related Fields in the Setup Program and “SCSI Select™” Utility

10 English

Updating SCSI-Related Fields in the

Setup Program and “SCSI Select™” Utility

After installing the SCSI card, you will need to update certain SCSI-

related fields in both the HP Setup Program and the SCSI

Configuration utility.

Updating the HP Setup Program

1 Restart the PC.

2 Press F2 when F2=Setup is displayed on the screen during

startup. The opening window of the HP PC Setup utility is

displayed.

Which Fields Need Updating?

The list below gives guidelines on how to configure a SCSI adapter.

The field names used in your version of the Setup program may be

slightly different to those shown below. You will need to:

3 Enable or Disable Plug and Play (PnP):

• For Windows 98 and Windows 2000 users, ensure that Plug

and Play is Enabled.

• For Windows NT 4.0 users, ensure that Plug and Play

is Disabled.

4 Ensure that the SCSI device is assigned the correct boot device

priority.

a If you want to boot from a SCSI device, select

Boot>Hard Disk Drives and change the boot order so that the

SCSI hard disk drive you want to boot from appears first in

the list. Then, select Boot>Boot Device Priority and change the

device priority so that Hard Drive is below Removable Devices,

and above other devices, such as CD-ROMs.

p2280a.book Page 10 Thursday, May 17, 2001 5:00 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

Adaptec P2280A Guía de instalación Pagina 14