Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Manual de usuario descargar pdf (Pagina 126)

4-10

Adaptec 7800 Family Manager

Table of aic78u2.dsk Command Line Options

slot= 0-xxxx

0 Defines a physical slot

number for the host

adapter. If 0 is specified, or

if this option is not

specified, then the driver

loads for all 7800 Family

host adapters.

verbose= yes, no no Displays host adapter

configuration information

at load time.

Many multiple-lun and removable media devices are changers or magazines. Some

of these are only supported by the driver through an ASPI driver provided by the

hardware vendor.

The values can vary and are dependent on the system configuration.

Option Values Default Description

auto_bus_fairness= on, off on Enables/disables auto

SCSI bus fairness

algorithm.

auto_disable_tagq= on, off on Enables/disables auto

disable tag queuing

algorithm.

auto_flush_diskreq= on, off on Enables/disables auto

disk flush algorithm.

dev_enable= 0-FFFF FFFF Allows you to enable the

driver's registration of

SCSI devices on a per

target basis. By default, all

targets are scanned. A bit

value of 0 causes the

target not to register

under the operating

system. These devices are

still accessible via ASPI.

This enable bit mask is

entered in hex (see Bit

Mask Options on

page 4-12).

Option Values Default Description

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 189 190

Sin comentarios

Adaptec 2910C - AHA Storage Controller Fast SCSI 10 MBps Manual de usuario Pagina 126