Adaptec ICP5045BL Guía de usuario descargar pdf (Pagina 10)

- RAID adapters do not produce an audible alarm on 64-bit Windows

operating systems, including:

o Windows XP Professional x64 Edition

o Windows Server 2003 x64 Edition (all versions)

4.5 Linux

- When you delete an array, the operating system can no longer see

the last array. WORKAROUND: To allow Linux to see the last array,

restart your system.

- The controller does not support attached CD drives during OS

installation.

- To remotely manage a Linux system from a Windows system, you must

use the standalone GUI.

- If you cannot connect to a local or remote ICP Storage Manager

installed on a Linux system, verify that the TCP/IP hosts file

is configured properly.

1. Open the /etc/hosts file.

NOTE: The following is an example:

127.0.0.1 localhost.localdomain localhost matrix

2. If the hostname of the system is identified on the line

with 127.0.0.1, you must create a new host line.

3. Remove the hostname from the 127.0.0.1 line.

NOTE: The following is an example:

127.0.0.1 localhost.localdomain localhost

4. On a new line, type the IP address of the system.

5. Using the Tab key, tab to the second column and enter the

fully qualified hostname.

6. Using the Tab key, tab to the third column and enter the

nickname for the system.

NOTE: The following is an example of a completed line:

1.1.1.1 matrix.localdomain matrix

where 1.1.1.1 is the IP address of the server and

matrix is the hostname of the server.

7. Restart the server for changes to take effect.

- With Linux kernel versions 2.4 and 2.6, the ARCCONF

DELETE <logical_drive> command may fail with a Kernel Oops

error message. Even though the drives are removed from the

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Adaptec ICP5045BL Guía de usuario Pagina 10