Adaptec GDTSETUP Manual de usuario descargar pdf (Pagina 136)

136

information for MSCDEX. As mentioned before, it is our objective to be able to access the

CD-ROM drive with a drive name (i.e. E). Naturally, this drive name has to be "free", and

there have to be enough drive names available. For example, the DOS command

LASTDRIVE=H would enable the user to use drive names from A to H. In the

AUTOEXEC.BAT file, the Microsoft translation program for CD-ROMs (MSCDEX - Microsoft

CD-ROM Extension) is loaded. It is not part of MS-DOS (except for version 6). The para-

meter /D:CD-ROM set here has to be identical to the parameter set after the ASPICD mod-

ule in the CONFIG.SYS file. After a warm reboot which serves to activate the changes made

in the CONFIG.SYS and AUTOEXEC.BAT files, the CD-ROM drive can be accessed as drive E

(in our example there are two SCSI hard disks in the PCI computer, and under MS-DOS they

are accessed as C and D). Drive E can be accessed under Windows, too, now (the Icon next

to "E" indicates that it is a CD-ROM drive).

'([DPSOH8VLQJFRUHO6&6,IRUWKH&'520

When using the corelSCSI software, the installation is carried out by a program (install) so

that the changes in the files CONFIG.SYS and AUTOEXEC.BAT mentioned below are, to a

large extent, made automatically. Under corelSCSI the SCSI/FAST-SCSI channels of the ICP

Controller are available as independent host adapters. The important lines in both files are

printed bold.

CONFIG.SYS

device=c:\windows\himem.sys

device=gdtx000.exe

files=30

buffers=30

stacks=9,256

dos=high,umb

shell=\COMMAND.COM /E:512 /P

device=\dos\setver.exe

device=\gdt\gdtaspi.exe

device=c:\corel\cuni_asp.sys /ID:6 /HAN:0 /N:1 /D:MSCD000

lastdrive=h

AUTOEXEC.BAT

path=c:\;c:\dos;c:\gdt;c:\aspi;

prompt $P -$G

c:\corel\corelcdx /M:8 /D:MSCD000

The first line following the HIMEM.SYS command of the CONFIG.SYS file loads the

GDTX000.EXE. The next line loads the GDT ASPI Manager GDTASPI.EXE. Next, the corel

ASPI Module for the CD-ROM drive is loaded. The parameter "/D:MSCD000" has nothing to

do with a drive name, it only serves as recognition information for CORELCDX. As men-

tioned before, it is our objective to be able to access the CD-ROM drive with a drive name

(i.e., E). Naturally, this drive name has to be "free", and there has to be enough drive names

available. For example, the command LASTDRIVE=H would enable the user to use drive

names from A to H under DOS. In the AUTOEXEC.BAT file, the corel translation program

for CD-ROMs, CORELCDX, is loaded. The parameter /D:MSCD000 set here has to be identi-

cal to the parameter set after the ASPI Module in the CONFIG.SYS file. After a warm reboot

which serves to activate the changes made in the CONFIG.SYS and AUTOEXEC.BAT files,

the CD-ROM drive can be accessed as drive E (in our example there are two SCSI hard disks

in the PCI computer, and under MS-DOS they are accessed as C and D). Drive E can be ac-

cessed under Windows, too, now (the Icon next to "E" indicates that it is a CD-ROM drive).

Information on the various CD-ROM drives which can be used can be obtained directly

from Corel.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 217 218

Comentarios a estos manuales

Sin comentarios

Adaptec GDTSETUP Manual de usuario Pagina 136

Comentarios a estos manuales

Relacionado con productos y manuales para Software Adaptec GDTSETUP