Adaptec Snap Server 700i Series Guía de usuario descargar pdf (Pagina 170)

3 Log in to the CLI as Administrator, using the password you set in “Step 2:

Configuring the iSCSI Storage Appliance” on page 36. If you didn’t set a

password, use the default password,

admin.

4 Enter:

isns

5 Enter:

server IP_address

Where IP_address is the address of the iSNS server (see Step 1).

6 To exit the CLI, enter:

end

quit

Note For more information about the CLI, see “Using the CLI” on page 179.

7 Configure iSNS in the iSCSI initiator.

You will need to configure the initiator and add an iSNS server to complete the

configuration of iSNS.

For example, from a Windows client:

• When using the Microsoft initiator, run the Microsoft initiator software, select

the iSNS Servers tab, and click

Add. Enter the name or address of the iSNS

server, and then click

OK.

• When using the QLogic4050/4052 initiator, right-click the QLogic adapter and

select

Properties. Select the Discovery Configuration tab, and check Perform

Discovery

. Check Use iSNS Server, enter the server name or IP Address, and

click

OK.

Note After you have completed this procedure, all the iSCSI targets on the iSCSI

Storage Appliance automatically appear in the Microsoft Initiators target list.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 237 238

Sin comentarios

Adaptec Snap Server 700i Series Guía de usuario Pagina 170