Adaptec APA-358 Guía de instalación descargar pdf (Pagina 12)

APA-358A MiniSCSI-2 Installation Guide

Part Number: 510809-00, Rev. A

Print Spec Number: 493477-00

Current Date: 4/11/95 ECN Date: 4/1195

After setting the option, perform the tests below

to ensure the adapter is functioning properly:

a Perform a dir command on a hard disk drive

and/or a CD-ROM drive. Check for problems,

such as absurdly wrong numbers or corrupted

file names being reported.

b Try copying a large file (greater than 100 KBytes,

if possible) from the SCSI device to a

non-SCSI hard disk or floppy drive. Then use

the DOS comp command to compare the new

copy to the original file. Check for problems,

such as the file comparison failing.

c Copy a large file from your non-SCSI drive to

a SCSI rewritable device. Again, compare the

two files with the comp command. Check for

problems, such as the file comparison failing.

2 If your MiniSCSI-2 still does not function prop-

erly, repeat step 1 with other

values (2 through 7)

until the adapter works. The idea is to optimize per-

formance by selecting the lowest

value that works

with your parallel port; typically the value of 2

works with most parallel ports with this problem.

Caution: If the MiniSCSI-2 still does not

work, it may not be compatible with your

parallel port. Contact Adaptec technical

support.

3 If you share the MiniSCSI-2 with other systems,

set up each system individually for proper perfor-

mance with the MiniSCSI-2. Be sure to follow the

instructions in steps 1 and 2.

1 2 ... 7 8 9 10 11 12 13 14

Sin comentarios

Adaptec APA-358 Guía de instalación Pagina 12