Adaptec SAS RAID Controllers Guía de instalación Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 148
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
18 Sun StorageTek SAS RAID HBA Installation Guide March 2010
FIGURE 2-5 Removing the Safety Clips From the SAS Connectors
2. Turn off the computer and disconnect the power cord.
3. Open the cabinet, following the manufacturer instructions.
4. Select an available x8 PCI Express expansion slot that is compatible with the
HBA and remove the slot cover.
Caution Touch a grounded metal object before handling the HBA.
5. Insert the HBA into the PCI Express expansion slot and press down gently but
firmly until it clicks into place.
When installed properly, the HBA will appear level with the expansion slot.
6. Secure the bracket in the x8 PCI Express slot, using the retention device (for
instance, a screw or lever) supplied with the computer.
7. Continue with the following section.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 147 148

Comentarios a estos manuales

Sin comentarios