Adaptec 29320-R SCSI Card Guía de instalación descargar pdf (Pagina 6)

cables are laminated so that they lay flat. Internal LVD cables

usually have a terminator built into the end of the cable.

The Adaptec SCSI Card 29320 has one internal 68-pin LVD/SE

connector and two internal SE connectors to which you can

connect internal SCSI devices, as shown in the figure on page 1.

Follow these steps to connect your internal Ultra320/160 and

Ultra2 devices:

Locate a 68-pin internal LVD SCSI cable, which may have either

twisted wires or flat wires, shown as follows.

Plug the nonterminated end of the cable(s) to one of the internal

LVD/SE connectors.

Adaptec recommends that you keep your Ultra320/160

and Ultra2 SCSI devices separate from your Ultra SCSI

devices. This allows the Ultra320/160 and Ultra2 SCSI devices

to transfer data at their maximum speed.

NOTE

STEP 1

Terminated end

Nonterminated end

STEP 2

ASC-29320 IG.fm Page 5 Wednesday, August 14, 2002 2:00 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Adaptec 29320-R SCSI Card Guía de instalación Pagina 6