search

Adaptec 131U2 - AAA RAID Controller Manual de instrucciones Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
C-3
Using a CD-ROM Drive
Command Line Options for
spi8dos.sys
(or
aspi8u2.sys
)
Option Example Use
/ccbs
<count>
/ccbs8 Specifies the maximum number of concurrent ASPI com-
mands that can be supported. The valid range is 1 through
16. The default is 4. If you increase this value, the size of the
ASPI manager also increases. Use this option only if you
want to run an ASPI program that specifies a higher number
of concurrent commands.
/d /d Displays information about the AAA-131U2/133U2 and
attached SCSI devices when the computer boots.
/L /L Enables aspi8dos to recognize all eight possible LUNs
associated with each SCSI ID. If the option is not used,
aspi8dos
can recognize only LUN 0 for each SCSI ID.
/m
n
/m1 Causes
aspi8dos
to scan the PCI bus. The method used
to scan the bus is determined by the value of
n
:
/mb = scan PCI bus using PCI BIOS calls
/m1 = scan PCI bus using Mechanism #1
/m2 = scan PCI bus using Mechanism #2
aspi8dos
automatically scans the PCI bus for SCSI
devices. It tries to determine which scanning method will
work best for the given system configuration. Use the /mb,
/m1, and /m2 options only if you want to override the
aspi8dos
internal scanning mechanism. Usually
aspi8dos
can determine which scanning method is optimal for your
system. (PCI BIOS calls are described in the PCI BIOS
spec; scanning mechanisms #1 and #2 are described in
the PCI spec.
/norst /norst Prevents
aspi8dos
from resetting the SCSI bus when you
boot your computer. By default,
aspi8dos
resets the SCSI
bus when you boot the computer if the host adapter BIOS
is not present. You can use /norst to prevent this from
happening.
/pause /pause Pauses the system after loading
aspi8dos
at bootup, so you
can read the message on the screen. After you read the
message, press any key to resume booting.
/rst /rst Forces
aspi8dos
to reset the SCSI bus when you boot
your computer. By default,
aspi8dos
does not reset the
SCSI bus when you boot your computer if the host
adapter BIOS is present.
/s<
slot
number
>
/s1 /s3 Indicates the slot number(s) where you want
aspi8dos
to
look for host adapters. Valid slot numbers = 1 to 15. If you
do not use this option,
aspi8dos
scans all slots for host
adapters, beginning at slot 1.
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82

Comentarios a estos manuales

Sin comentarios
  • Skeeter Defeater DuPont GEM Innominate Deltec
  • Lindy Tarjetas de interfaz / adaptadores Kenwood Equipo musical Alcatel-Lucent Puentes Y Repetidores Transcend Discos duros externos Acer Los teléfonos inteligentes
  • Samsung S19B420M Campbell Hausfeld FP202801 Altronix MAXIMAL3RH Delock 89156 Russell Hobbs 21480
  • Electro-voice PA2250T Manual de usuario Canon Optura 200MC Especificaciones Samsung BX2231 Manual de usuario LG Optimus-3D-Max Manual de usuario