Adaptec 131U2 - AAA RAID Controller Manual de instrucciones descargar pdf (Pagina 33)

2-19

Installing the Hardware

Configuring the AAA-131U2/133U2

After connecting all devices, reinstall the computer cover and con-

nect all power cables. Turn on the external SCSI devices first, and

then turn on the computer. During BIOS initialization, the

AAA-131U2/133U2 BIOS banner should appear on the screen, and

each device connected to the adapter should be listed. If the BIOS

banner does not appear, see Appendix B, Troubleshooting.

Before installing the drivers and software for the AAA-131U2/

133U2 RAID card, you may want to configure SCSI options (e.g., ID,

Parity Checking, and Termination) for the card and the SCSI devices

connected to it by running the onboard SCSISelect utility. To do this

press F6 when the following prompt appears during BIOS

initialization:

Press <F6> for SCSISelect (TM) Utility!

In most cases, it is not necessary to run the SCSISelect utility. Should

you need to configure SCSI options, see Appendix A, Using SCSISelect

and Disk Utilities for additional information.

❒

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

Sin comentarios

Adaptec 131U2 - AAA RAID Controller Manual de instrucciones Pagina 33