Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Especificaciones descargar pdf (Pagina 45)

DPU Battery and Fuse Maintenance

2. Gently slide the DPU module out of the cabinet rack and set the unit

down on an appropriate work surface, component side up.

3. Locate the battery compartment on the upper right side and remove the

battery plug from the J13 connector.

4. Remove the top metal cover.

5. Locate the fuse to be replaced. Both fuses are located on the upper right

side of the motherboard.

6. Carefully remove the fuse by pulling it straight up. Do not place any

pressure on the circuits near the fuse.

7. Install the fuse into the same connector from which the old fuse was

removed.

8. Install the metal cover.

9. Reconnect the battery plug to J13 connector.

10. Install the DPU in the chassis using the appropriate procedure found in

Chapter 7," Starting a Standalone DPU," or "Replacing a DPU in a

Backup Pair."

Metso Automation MAX Controls Inc. • 278590 •

8-3

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Sin comentarios

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Especificaciones Pagina 45