Adaptec AVA-2825 Guía de instalación descargar pdf (Pagina 4)

If the installer requests the CD rom with \OS2IMAGE you should

(temporarily) insert eCS CD#2.

4) The fourth option is for TCP/IP and Netbios (file and printer sharing).

Click on continue and make sure you read the instructions. Click on

continue

when finished.

No network

If your computer does not have a networkcard installed, press Cancel

then OK to confirm.

Network - only TCP/IP

If you do not want to share printers and files with a Windows

workstation or access printers and files on an OS/2 or Windows

server, choose TCP/IP

only. Again, read the onscreen instructions

carefully! By pressing execute

you will invoke an utility called MPTS.

Click on Ok

and choose to configure MPTS. Click once again on

configure

. Now select the networkcard which is in your computer. In

some cases your networkcard may not be listed because the chipset

is listed and not the manufacturer of your networkcard.

If you cannot find the correct networkcard listed but you do have a

diskette from your manufacturer with OS/2 drivers you can choose to

Other adapters...

Follow the instructions to add the driver. It may be

necesarry to point to the exact location on your diskette, most of the

times the OS/2 driver will reside in \NDIS2.

When you found the correct NIC, select it and press on the button

change

. In the window "stage 3" the name of the NIC will change

accordingly. Then select the protocol "IBM OS/2 NETBIOS" in the

stage 3 window and click on the remove

button and confirm with a

click on yes

. Repeat these steps for Netbios over TCP/IP. Click on

to exit this program and confirm that changes are written to your

bootdrive.

Network - TCP/IP and Local Networking

If you want to use TCP/IP and share files and printers, please push

on Execute

instead of the TCP/IP only button. Read the instructions

again. Insert CD#2 and press on execute

when finished reading.

Before pressing ANY button, UNSELECT the options TCP/IP and

Netscape! Then click on next

It is advised to configure the following screen from bottom to top.

TCP/IP

Chapter 2: Installation 7

The option TCP/IP services need only to be configured if you to

connect your computer via a networkcard in your Local Network.

Select DHCP server if there is a server in your network that assigns

your computer with an IP address. If you have a small network, you

usually do not have a DHCP server and you should manually assign

an IP address and netmask. If you connect to an internet provider via

modem or ISDN card these options can be configured later.

File and Printer Sharing

If you have selected to also install the file and printer sharing, you

need to fill in an userid and password. Please make certain you do

not loose this information! The next option, most users can directly

put a green checkmark before. This option is only needed when you

have more then one NIC in your system. The last option at the top is

important. The name given to system is as is shows up in your

network browser. This name must be unique!

Also assure the domain name is the same as your other

eComStation / Windows (Workgroup name) machines if you want to

share files and printers between all machines.

If you keep Netbios over TCP/IP enabled and your machine also

directly connects to the internet, this may be a potential security risk.

eComStation provides you with a built-in firewall, which you can

configure with Zampa. Please consider enabling the firewall.

After the Network Configuration

When you are finished, press the Install

button, then click on OK.

Your system will be shutdown. When your system says so to do so,

press CTRL ALT DEL to restart.

At the next reboot the system will load the installer to install the File

and Print Client. Please sit back and wait for the system to reboot.

When the eComStation desktop has started up again please read the

screen closely. If you do NOT want to share devices or printers that

are available on the computer you are installing eComStation on, do

not check the box "replace NET START REQ with....". If you DO want

to share your resources with other machines in your Local Network,

check this box.

Finishing your installation

After you finished the Network configuration (if selected) you will be

prompted by WiseMachine to enter the registration key of eComStation

8 eComStation Manual

1 2 3 4 5 6 7 8 9 ... 34 35

Comentarios a estos manuales

Sin comentarios

Adaptec AVA-2825 Guía de instalación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Software Adaptec AVA-2825