Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Información técnica descargar pdf (Pagina 56)

46 Netfinity and Windows 2000 Integration Guide

• Nine-pin D-shell cable assembly

• Netfinity Manager 5.20.4 CD-ROM

• ASM PCI adapter firmware update

The PCMCIA card is inserted into the Type II slot on the ASM PCI adapter (see

Figure 25 on page 43). The cable is then connected to it and routed to the

knockout at the rear of the server. You will need an additional cable to connect the

DB9 connector to your LAN. See the Advanced System Management PCI

Adapter installation instructions for more details.

Note: Once the token-ring option is installed, the Ethernet port is automatically

disabled.

2.6.1.4 Interconnect cable option

As standard, Netfinity servers are not capable of connecting to the ASM

interconnect bus. To achieve this, you will need one of the following:

• Advanced System Management PCI Adapter, purchased separately (as part

01K7209 in the U.S.) as described in 2.6.1.2, “Ordering the adapter

separately” on page 44.

• Advanced System Management Interconnect Cable Kit, part 03K9309, for use

on servers where the ASM PCI adapter is standard (such as the Netfinity 7000

M10) or the ASM processor is integrated (such as the Netfinity 5000 and

5500).

Notes:

1. If you obtain the ASM PCI adapter as an option, you do not need the

interconnect cable kit as well, as the equivalent cables are already included.

2. The Netfinity 5500 models 8660-1xU and 8660-4xU do not support the

interconnect cable kit nor connectivity to the ASM interconnect bus.

Figure 28 shows the Advanced System Management Interconnect Cable Kit:

Figure 28. Advanced System Management Interconnect Cable Kit

This kit provides the necessary cables to interconnect an installed ASM

processor or ASM PCI adapter with other servers. It includes the following

components as shown in Figure 28:

• Internal ASM Interconnect knockout cable, making the ASM connection on the

Netfinity 5000/5500/5600 system board available externally through a

knockout on the server’s casing for use in the RS-485 network.

Note: This cable is not needed when used with the Netfinity 7000 M10.

ASM interconnect

single pigtail cable

Internal ASM

interconnect

knockout cable

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 187 188

Sin comentarios

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Información técnica Pagina 56