Adaptec 110 Especificaciones descargar pdf (Pagina 16)

INSTALLATION

How to mount an AdapTec AC onto a wall

1

2

4

INPUT : AC 110 ~ 240V

OUTPUT : DC 12V 3A

After removing the piece, you will have

one L-shape piece and 2 screws.

3

Identify a location to mount the

AdapTec AC on a wall.

Fix the AdapTec AC onto the wall

by tightening the screws into the 4

holes.

Remove the L-shape piece from the AdapTec AC

Find an L-shape piece at the top right of an

AdapTec AC. This piece is attached to the

AdapTec AC by 2 screws.

Attach the L-shape to the AdapTec AC as

shown and tighten the screws.

Open the cap, look for the part shown in

the diagram and you will see 2 holes.

www.fingertec.com

© 2010 FingerTec Worldwide Sdn. Bhd. All rights reserved. • Printed in Malaysia. 042010

Install the piece to the AdapTec AC

The other 2 holes at the bottom

Mount the AdapTec AC on a wall

1 2 ... 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios