Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Guía de instalación descargar pdf (Pagina 9)

Adaptec SCSI Card 19160

You can connect up to 15 SCSI devices to the Adaptec SCSI Card

19160. Before connecting devices, be sure to review Setting Up

SCSI Devices on page 5. For additional details on connecting

devices, refer to the Adaptec SCSI Card 19160 User’s Reference.

Connecting Internal LVD (Ultra160 and Ultra2) SCSI

Devices

Connect internal LVD SCSI devices to the internal LVD/SE

connector on the Adaptec SCSI Card 19160. To do this, use a

68-pin internal LVD cable like the one shown in Step 1 below.

Follow these steps to connect the devices:

Locate a 68-pin internal LVD SCSI cable, which should have

twisted wires as shown below to support LVD devices.

ONNECTING

SCSI D

EVICES

We recommend that you keep your LVD SCSI devices

separate from your SE (Ultra SCSI) devices. This allows LVD

SCSI devices to transfer data at their maximum speed. (See

Bus Segments on the Adaptec SCSI Card 19160

on page 2.)

OTE

TEP

Terminated End Nonterminated End

ASC-19160_IG.book Page 7 Wednesday, December 1, 1999 12:47 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sin comentarios

Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Guía de instalación Pagina 9