Adaptec AFW-4300A Guía de instalación

RHARDWARE INSTALLATION GUIDEAFW-4300400 MBPS FIREWIRE HOST BUS ADAPTER1394IG.fm Page 12 Thursday, November 9, 2000 8:55 AM

9Support Options• Search the Adaptec Support Knowledgebase (ASK) at http://ask.adaptec.com for articles, troubleshooting tips, and frequently asked qu

10Australia and New Zealand• Visit our Web site at http://www.adaptec.com.au.• To speak with a Technical Support Specialist, call +612 9416 0698, Mond

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interf

1With the Adaptec AFW-4300 Host Adapter (or AFW-4300), you can connect Digital Video (DV) camcorders or other devices with a 1394 (also known as FireW

2Discharge any static electricity build-up before handling the AFW-4300 by touching a grounded metal object (such as the exposed metal parts on the ba

3Insert the AFW-4300 into the PCI expansion slot. Press down firmly until the card clicks into place; then replace the slot cover screw. When installe

4Go in the Windows Device Manager and check to see if the adapter is installed correctly under the IEEE 1394 Bus Host Controller section.Macintosh Ins

5Follow these steps to attach a Digital Video Camera to your AFW-4300.Using a standard 6-to-4-pin 1394 cable, plug the larger connector (6-pin) of the

6You can connect up to 62 1394 devices to the AFW-4300 in almost any configuration using either 6-to-6-pin or 6-to-4-pin 1394 cables.If you have any p

7• For the Power Macintosh system, verified that the card is seen by the Apple System Profiler?To verify that the card is seen by the Apple System Pro

8Copyright© 2000 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored, in a retrieval system, or transmitted in an