
18
Adaptec SCSI Card 19160 User’s Reference
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec) 160.0, 80.0, 53.4,
40.0, 32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
160.0
Initiate Wide Negotiation Yes, No Yes (Enabled)
Enable Disconnection Yes, No Yes (Enabled)
Send Start Unit Command Yes, No Yes (Enabled)
Enable Write Back Cache Enabled/Disabled
/N/C (No Change)
N/C (No
Change)
BIOS Multiple LUN Support Yes, No No (Disabled)
Include in BIOS Scan Yes, No Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization Enabled/Disabled Enabled
Display <Ctrl> <A> Messages dur-
ing BIOS Initialization
2
Enabled/Disabled Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
2
Enabled/Disabled Enabled
Verbose/Silent Mode Verbose/Silent Verbose
Host Adapter BIOS Enabled
Disabled: Scan
Bus
Disabled: Not Scan
Enabled
Domain Validation
2
Enabled/Disabled Enabled
Support Removable Disks Under
BIOS as Fixed Disks
2
Boot Only/
All Disks/Disabled
Disabled
BIOS Support for Bootable
CD-ROMs
2
Enabled/Disabled Enabled
BIOS Support for Int 13 Extensions
2
Enabled/Disabled Enabled
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
SCSI
Select
Options Available Settings
Default
Setting
Comentarios a estos manuales