Adaptec APA-1460A Guía de usuario descargar pdf (Pagina 26)

SlimSCSI 1460 Adapter User’s Guide

Verify that the SlimSCSI 1460 software driver is loading prop-

erly (see below).

How do I determine if the SlimSCSI Windows 95 miniport driver is

working correctly?

Insert the SlimSCSI 1460 into the PC Card slot, if it is not

already inserted.

Click the Start button and click Settings.

Click Control Panel.

Double-click the System icon, then select the Device Manager

tab.

Double-click SCSI controllers. The driver for the SlimSCSI

adapter is listed as Adaptec APA-1450/60 PCMCIA SCSI

Adapter.

■

If the driver is listed, this means it is loaded properly.

■

If the driver is listed but has an exclamation mark inside a

yellow circle, it is in a problem state (usually indicating a

conflict with other hardware using the same resources.)

■

If the driver is listed but has an “X” inside a red circle, this

indicates that it is disabled and is not loading.

■

If the SCSI controllers icon or the APA

™

-1460 driver is not

listed, reinstall the driver (see directions on page 6).

Note:

Software upgrades (including downloadable drivers)

for Adaptec products are available on the Adaptec Web site

http://www.adaptec.com

An “X” inside a red circle appears with the SlimSCSI 1460 software

driver in Device Manager. What does this mean?

It means that the software driver is disabled and is not loading. Fol-

low these steps to enable the driver:

Double-click the SlimSCSI 1460 software driver in Device

Manager.

Under the General tab, check the Original Configuration (cur-

rent) box.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Sin comentarios

Adaptec APA-1460A Guía de usuario Pagina 26